
12 Channel Digital Input/Output Relay Module
Main features
📄 Documents: Spec sheet · Datasheet
Enquire on WhatsAppFutureNow Ethernet and FN485 DIN-rail relay, dimmer, shading, thermostat and input modules, and the Tyba Turn 2 rotary room controller with its bus connectors, integrated by Quicknet into Control4, KNX and other control platforms across the UAE.






Controller-led platforms such as Control4 excel at user experience and AV, but a whole-house or small commercial project still needs dependable hardware in the panel to switch circuits, dim lighting, drive blinds and read contacts. FutureNow modules fill that role. The manufacturer publishes its communication protocol so integrators can connect the DIN-rail units to many third-party systems, which gives designers freedom to choose the controller independently of the load hardware.
The FNIP family communicates over Ethernet and includes the FNIP-8x16A relay switch in standard, pro and premium versions, the FNIP-6x2AD leading and trailing edge dimmer, the FNIP-12xPWM low-voltage LED dimmer, FNIP-4xSH shading controllers, digital input modules, I/O modules and the FNIP-12xMZT multi-zone thermostat. FN485 equivalents run on a shared bus through a gateway. OPTI LITE uses a mainboard with plug-in output boards for relays, bi-stable relays, 0 to 10 V, PWM LED, shading, DALI-2 and fan-coil control.
Tyba Turn 2 is a compact room controller that combines a rotary ring with a touch display for lighting, climate, shades and audio. It mounts magnetically onto a bus connector for KNX, Cresnet, Ethernet PoE or DC power, finished with a wall plate in black, silver or bronze or a black table stand. Quicknet selects the right combination for each project, installs the panels and programmes the integration.
Browse FutureNow FNIP, FN485 and OPTI LITE modules alongside Tyba Turn 2 controllers, bus connectors, wall plates and table stand. Each listing shows the order code and product details.

Main features
📄 Documents: Spec sheet · Datasheet
Enquire on WhatsApp
The FNIP-12xPWM 12 Channel Ethernet LED Dimmer is ideal for dimming low-voltage (3-30V) single color or RGB or RGBW…
Enquire on WhatsApp
Main features
Enquire on WhatsApp
The FNIP-16xDI / FNIP-32xDI is a 16 / 32 channel digital input module designed to control any output on any module…
Enquire on WhatsApp
The FNIP-16xDIOC is an I/O module with 16 Digital Inputs and 16 Open Collector Outputs. It is ideal for driving…
Enquire on WhatsApp



The FNIP-16xDI / FNIP-32xDI is a 16 / 32 channel digital input module designed to control any output on any module…
Enquire on WhatsApp
The FN-Touchpad4 is an elegant 4-button touch keypad. It provides contact closures, so it can be directly connected…
Enquire on WhatsApp
The FN-Touchpad4 is an elegant 4-button touch keypad. It provides contact closures, so it can be directly connected…
Enquire on WhatsApp
The FN485-4x0-10V four channel Intelligent DIN Rail Mountable Analog Output Module is used for dimming fluorescent…
Enquire on WhatsApp



The FNIP-6x2AD is a 6 Channel Ethernet Smart Dimmer that can work in both leading edge and trailing edge modes. All…
Enquire on WhatsApp
The FN485-6x2AD is a 6 Channel FN485 Bus Smart Dimmer that can work in both leading edge and trailing edge modes.…
Enquire on WhatsApp
The FNIP-8x16A 8 Channel Ethernet Relay Switch can be used for switching any type of load that doesn't exceed the…
Enquire on WhatsApp
The FNIP-8x16A 8 Channel Ethernet Relay Switch can be used for switching any type of load that doesn't exceed the…
📄 Documents: Spec sheet · Datasheet
Enquire on WhatsApp
The FNIP-8x16A 8 Channel Ethernet Relay Switch can be used for switching any type of load that doesn't exceed the…
📄 Documents: Spec sheet · Datasheet
Enquire on WhatsApp
The FNIP-8x16A 8 Channel Ethernet Relay Switch can be used for switching any type of load that doesn't exceed the…
📄 Documents: Spec sheet · Datasheet
Enquire on WhatsApp
The FN485-8x16A 8 Channel Relay Module is used for switching any kind of load that do not exceed the output…
Enquire on WhatsApp


The FN485 Gateway is a gateway between automation controllers and the FN485 bus. It is not merely an RS232/FN485…
Enquire on WhatsApp
The FNIP-12xMZT is a 12 zone programmable thermostat with analog inputs and NO relay outputs. The setpoints and…
Enquire on WhatsApp
Optimized for success Based on more than 25 years of providing reliable Smart Home solutions to integrators all over…
Enquire on WhatsApp
Includes; 2xDALI-2 Output Board; 2 x DALI-2 bus Gateway output board, supports DT6, DT8 OPTILITE-MAIN; OPTI LITE…
Enquire on WhatsApp
The OPTI-Thermostat is an elegant touchpad thermostat with an OLED display. Offering a similar look and feel, it…
Enquire on WhatsApp
The OPTI-Thermostat is an elegant touchpad thermostat with an OLED display. Offering a similar look and feel, it…
Enquire on WhatsApp

The FNIP-4xSH four channel Ethernet Window Covering Controller is used for controlling motorized shutters, blinds…
Enquire on WhatsApp
The FNIP-4xSH four channel Ethernet Window Covering Controller is used for controlling motorized shutters, blinds…
Enquire on WhatsApp
The FNIP-4xSH four channel Ethernet Window Covering Controller is used for controlling motorized shutters, blinds…
Enquire on WhatsApp
The FN485-4xSH four channel Intelligent DIN Rail Mountable Window Covering Controller is used for controlling…
Enquire on WhatsApp




Introducing Turn 2™.
Enquire on WhatsApp
Introducing Turn 2™.
Enquire on WhatsApp
Introducing Turn 2™.
Enquire on WhatsApp




Product names, specifications and images are provided for identification; confirm current model availability, finishes and datasheets with our team before ordering.
FNIP modules each take a network connection, which suits distributed panels and structured-cabling projects. FN485 modules share a bus behind a single FN485 gateway, which reduces switch ports in a central panel. Decide per project based on panel locations, network design and the integration driver available for the chosen controller.
OPTI LITE is a modular approach: a mainboard with digital inputs plus output boards chosen per project, including relay, DALI-2, shading, analogue and fan-coil boards. It suits homes, offices and small commercial spaces where a compact, configurable panel is preferable to many single-function modules.
Check each circuit before selecting outputs. The FNIP-6x2AD dims mains loads in leading or trailing edge mode, the PWM dimmers handle low-voltage single-colour and RGBW LED, and 0 to 10 V outputs drive suitable drivers and ballasts. Relay outputs must be rated for the inrush of the connected LED drivers.
The FNIP-12xMZT multi-zone thermostat and the OPTI fan-coil boards with the OPTI Thermostat suit the chilled-water fan-coil systems found in many UAE villas and apartments. Place temperature sensors away from direct sun and supply air, and agree setback logic for unoccupied rooms with the MEP design.
The bus connector defines how Turn 2 talks to the system: KNX for a KNX bus, Cresnet for Crestron, Ethernet PoE for IP-based platforms, or DC power for a Wi-Fi only setup. Fix the connector choice at first-fix so the correct cable is at every location.
FutureNow modules are DIN-rail devices that need an external low-voltage supply. Allow panel space, ventilation for warm service areas, a managed switch with enough ports for Ethernet modules and clear circuit labelling. We document IP addresses and module channels for the handover pack.
Quicknet supplies, installs, programmes and supports these products from its Mussafah head office and its branches in Abu Dhabi and Al Ain, and takes on projects in Dubai and other emirates on a project basis (Quicknet has no office there). Site surveys, installation and after-sales support cover Abu Dhabi city and its island and suburban communities (including Saadiyat, Yas, Al Reem, Khalifa City and Mussafah), and Al Ain. Dubai villa communities and commercial buildings are quoted on a project basis by our Abu Dhabi team.
Local pages: Building management systems in Abu Dhabi · Building management systems in Dubai · Building management systems in Al Ain
FutureNow states that its modules integrate with platforms including Control4, Crestron, AMX, Savant, Extron, Q-SYS, Fibaro and Home Assistant, because the communication protocol is published for integrators. In practice, integration quality depends on the driver or module available for the chosen controller and version. We confirm driver availability for your platform during design, before any hardware is ordered.
FNIP modules connect individually over Ethernet. FN485 modules sit on a shared FN485 bus that connects to the controller through the FN485 gateway. OPTI LITE is a slot-based system where a mainboard hosts plug-in output boards such as relays, DALI-2, shading, 0 to 10 V and fan-coil control, so one unit can be tailored to the room or panel.
Tyba lists native integration with Crestron, Control4, KNX and several other platforms. On a KNX installation, the KNX bus connector links Turn 2 directly to the KNX bus. For IP-based systems, the Ethernet PoE connector is normally used. The controller then mounts magnetically onto the connector, finished with a wall plate or placed on a table stand. We confirm the connection method for your platform during design.
Yes. The FNIP-4xSH and FN485-4xSH window covering controllers and the OPTI shading output board drive conventional motorised shutters, blinds and curtains. Motor voltage and wiring must match the controller's outputs, and motors with their own proprietary bus may need a different interface. We confirm motor type with the curtain supplier before finalising the panel design.
FutureNow modules are used in homes, offices and small commercial spaces, and the Ethernet and FN485 options suit distributed and centralised panels respectively. Larger commercial buildings with many floors often suit KNX or a BMS for field control, with these modules used where a specific controller integration is required. We recommend the architecture that fits the building and its operators.
Quicknet supports the installations we commission, including controller programming changes, module replacement and network troubleshooting. An annual maintenance contract adds scheduled checks, configuration backups and priority response. Product lead times vary by model and quantity and are confirmed with each quotation rather than assumed. We also keep a record of module addresses, firmware versions and controller configuration so future changes can be made without disruption.
Central controllers that can drive FutureNow modules.
Control4 design, programming and installation by Quicknet.
A KNX-native alternative for switching, dimming and shading.
Motorised shading controlled by these window covering modules.
Whole-home automation across lighting, climate, AV and security.
Annual maintenance for automation systems after handover.