Skip to main content

Magnetic Lock Installation in Abu Dhabi, Al Ain and Dubai

Maglocks for glass and steel doors with power supply, exit button, emergency release, reader and optional fire-alarm link, installed and tested.

Get a Free Quote   📞 Book a Site Survey

By Quicknet Engineering Team, Quicknet Computers · Reviewed by Jenson Cleetus · Published: 14 November 2026 · Last reviewed: 14 November 2026
✅ Free site survey ✅ Written itemised quote ✅ Abu Dhabi, Al Ain and Dubai projects ✅ ISO 9001:2015 & ICV Certified
The Service

What Magnetic Lock Installation Includes

A magnetic lock (maglock) holds a door shut with an electromagnet and releases the moment power is cut or a reader, button or fire alarm signals it. It is the usual choice for glass doors, steel doors and office entrances. Quicknet Computers fits maglocks together with the parts that make them safe and dependable: the armature plate, a power supply, an exit button, an emergency break-glass release, the access reader and the fire-alarm link where the building needs it, in Abu Dhabi, Mussafah, Al Ain and on Dubai projects.

  • Single and double door maglocks for offices, clinics, schools and warehouses
  • Glass-door fittings with bracket sets that do not damage the glass
  • Power supply with battery back-up so the door state is predictable in a power cut
  • Exit button, break-glass release and a door-open sensor
  • Connection to a card, PIN, fingerprint or face reader
  • Fire-alarm release wiring, with the final approval left to the building rules
Process

How We Install a Magnetic Lock Correctly

  1. Survey the door. We check the door material, frame, how it opens, who must get through it and what the building rules require for emergency exit.
  2. Choose the holding force. The lock size follows the door type and the use. A heavy steel door and a light glass door need different locks.
  3. Mount the lock and the plate. The lock is fixed to the frame and the armature plate to the door so they meet flat; a misaligned plate is the most common reason a maglock holds weakly.
  4. Wire the power and controls. A dedicated power supply, a clean cable run, the exit button and break-glass wired in series so that any of them releases the door.
  5. Add the reader. The reader is wired to the controller and the lock, and the unlock time is set.
  6. Link to the fire alarm. Where required, the lock is wired to release when the fire alarm activates.
  7. Test. We test normal entry, exit button, break-glass, power loss and fire release, and walk you through the settings.
Choosing

Magnetic Lock or Electric Strike?

Magnetic lock and electric strike compared.
QuestionMagnetic lockElectric strike
Best forGlass, aluminium and steel doors; offices and clinicsWooden and metal doors with a latch
If power is cutDoor releases (fail-safe)Can be set to stay locked or unlocked
Visible partsLock on the frame and plate on the doorSmall plate in the frame
Security feelStrong when alignedDoor stays latched
Exit rulesNeeds exit button and emergency releaseNeeds an exit route and the latch on the inside
Avoid

Mistakes That Make Maglocks Unsafe or Unreliable

  • Fitting a maglock with no emergency release, which can trap people.
  • Powering the lock from a weak supply that drops voltage on a long cable.
  • An armature plate left loose or not flat against the lock.
  • No door-position sensor, so staff cannot tell if the door is really closed.
  • Ignoring the fire-alarm link where the building requires it.
Coverage

Magnetic Lock Installation in Abu Dhabi, Al Ain and Dubai

We fit maglocks in Abu Dhabi island, Mussafah, Khalifa City and Al Reem Island from our Abu Dhabi offices, in Al Ain from the Al Ain branch and in Dubai on a project basis. Typical sites are offices, clinics, schools, warehouses, labs and server rooms. Related pages: access control systems, biometric access control and video door phone installation.

Quicknet

Why Have Quicknet Fit Your Magnetic Locks

Quicknet Computers designs and installs access control in Abu Dhabi since 2012 and works with ISO 9001:2015 and ICV certification. We will not fit a lock that leaves a door without a safe exit. Request a free survey.

FAQ

Magnetic Lock Installation: FAQs

Do you install magnetic locks in Abu Dhabi?
Yes. Quicknet Computers installs magnetic locks with power supply, exit button, emergency release and reader in Abu Dhabi, Mussafah and Al Ain, and on Dubai projects.
Can a magnetic lock go on a glass door?
Yes, with the right glass-door bracket set. We check the glass, frame and how the door opens before choosing the fitting.
What happens to a magnetic lock if power fails?
It releases, so the door is no longer locked. A battery back-up in the power supply keeps the door secured through short power cuts.
Do I need an emergency break-glass button?
Most buildings need a safe way out on a door held by a maglock. We follow the building rules and fit the release your site needs.
Can it work with a fingerprint or card reader?
Yes. We wire the lock to the reader and controller and set the unlock time.
Can it connect to the fire alarm?
Yes, where the building requires it, by a release wired to the fire alarm panel. Final approval follows the building rules.
Do you install in Dubai?
Dubai is handled on a project basis. We plan, price and schedule the job. We have no Dubai office.
How do I get a quote?
Send the number of doors, the door material and the location by WhatsApp or the contact form. We survey for free and send an itemised written quote.

Get a Quick Quote

Share a few details and your enquiry goes straight to our sales team.

Prefer WhatsApp? Message us on WhatsApp

We reply to your enquiry with a written quote after the site survey.

We use your details only to reply to your enquiry. Privacy policy

Need Magnetic Locks Installed?

Tell us the number of doors, the door material and the location in Abu Dhabi, Al Ain or Dubai; we survey for free and send an itemised written quote.

Get a Free Quote ‎+971 50 852 9609‎   💬 Chat on WhatsApp