Compliance & Approvals
It depends on the project. Applicable electrical, building, telecom and sector requirements are confirmed at the site survey.
Single-mode and multi-mode fibre — design, splicing and OTDR testing delivered across Al Ain by Quicknet Computers — high-bandwidth fibre backbone with certified termination. Free site survey from our Al Ain branch.
Al Ain — the Garden City — is a uniquely positioned market: heritage farms, oasis communities and traditional villas alongside modern shopping malls, large hospitals, the United Arab Emirates University, and increasingly modern industrial zones. Customers in Al Ain expect the same quality of IT and security infrastructure available in Abu Dhabi, delivered from our Al Ain branch, backed by our Mussafah HQ team.
For Fiber Optic Cabling specifically, Quicknet delivers across Al Ain with a single accountable team — design, supply, installation, commissioning and ongoing AMC. Single-mode and multi-mode fibre — design, splicing and OTDR testing — engineered for Al Ain business conditions and supported by our Mussafah workshop.
Areas covered: Al Jimi, Al Mutaredh, Al Manaseer, Al Khabisi, Al Tawia, Al Murabaa, Al Sarooj, Al Mutawah, Al Hili, Al Foah, Al Yahar, Al Jahili, Al Khrair, Al Khaznah.
It depends on the project. Applicable electrical, building, telecom and sector requirements are confirmed at the site survey.
Fiber Optic Cabling can be quoted for offices, campuses, data rooms, hotels, hospitals and industrial facilities across Al Ain; the final scope is confirmed at the site survey.
Quicknet's Al Ain branch schedules installations in the same week where possible, and the AMC quotes a 4-hour response tier for critical incidents in Al Ain. Spare parts sourced for fast swap-out.
The default choice for new-building backbones in Al Ain, inter-building fibre routes, extended farm and villa runs, and links to regional data centres. Supports 10/40/100 Gigabit over distances up to several kilometres without signal regeneration. 9-micron core diameter, 1310/1550nm wavelength. Initial connector and module cost is slightly higher than multi-mode, but the gap narrows at 25G capacities and above.
The economical choice for intra-building backbones and regional data centres (≤400m for 10G, ≤150m for 100G). 50-micron core diameter, 850/1310nm wavelength. Uses MPO/MTP connectors for high-density links (40/100/400 Gigabit). OM5 (SWDM) adds the ability to run four wavelengths over the same fibre — useful for future upgrades without re-pulling cable.
Still a valid choice for partial upgrades and cable runs in existing Al Ain buildings when budget is limited and required capacity is 10G for distances ≤300m. Preferred when existing equipment is already OM3-compatible.
In large facilities or a campus (such as UAEU) we design hybrid cables combining OS2 and OM4 fibre in a single jacket — delivering the inter-building backbone (OS2) and intra-building runs (OM4) in one pulling operation, cutting containment cost and overall time.
Fusion splicing for permanent joints with insertion loss below 0.1dB on intra-building links and below 0.05dB for the outdoor backbone. We use internationally certified splicers with immediate field loss measurement after every splice.
LC for high-density connections (the default for data centres and IT rooms), SC for traditional runs and building backbones, MPO/MTP for 12/24-fibre trunk connections, ST for legacy equipment upgrades. UPC polish (blue) for most data applications, or APC polish (green) for GPON applications and critical wavelength use.
Every fibre run we deliver in Al Ain is tested with an OTDR (Optical Time-Domain Reflectometer) from both directions at two wavelengths — giving a full loss trace, the location of every splice, and a return-loss measurement. A formal LinkWare PDF report is delivered.
Optical loss testing with an OLTS (Optical Loss Test Set) from both directions at two wavelengths — to verify total insertion loss for the complete channel against the calculated optical budget. Required for manufacturer certification (Belden/Commscope/Norden) to secure a 25-year warranty.
Every terminated connector undergoes end-face inspection with a certified video microscope before commissioning. Contaminated end-faces are among the most common causes of fibre failures — this step prevents future problems.
Every fibre outlet, LIU panel and splice enclosure carries a numbered label under the TIA-606-C system, with as-built drawings for every splice point and an updatable database. Ease of future maintenance and expansion depends entirely on the quality of initial documentation.
We work neutrally across internationally trusted fibre optic manufacturers with wide acceptance in the UAE. We are an independent integrator — not an exclusive authorised dealer for any single brand, and specialise in matching equipment to the site's actual requirements, project budget and future-upgrade needs:
High-quality American cable, popular in the UAE for its 25-year manufacturer certification, LIU panels and flexible patch cords. A strong choice for projects requiring documented certification.
A globally recognised structured cabling system, with a detailed certification programme and long-term warranty options. Suited to government projects and data centres.
A high-performance, competitively priced cabling and fibre optic system, popular in the UAE market. A good choice for mid-size projects requiring documented manufacturer certification.
An American fibre optic system known for pre-terminated trunk solutions and high-density MPO/MTP solutions for data centres.
The world's parent company in fibre optic manufacturing. Corning cables are the reference standard in data centres and government facilities. Available on request for high-specification projects.
Japanese / Japanese-American manufacturers, global leaders in outdoor fibre cable, common in Etisalat e& and du cabling, and suited to inter-building routes and regulatory-approval-bound projects.
A site visit in Al Ain within 24-48 hours. Actual distance measurements, available-route inspection, termination-point identification, and a site-conditions survey (underground, suspended ceilings, existing networks).
A route drawing with precise dimensions, fibre-type selection (OS2/OM4/OM5/hybrid), an optical budget calculation for every link, connector count and type, and splice-enclosure and LIU-panel selection. A written quote within 3 business days.
Where required, we prepare the drawings and calculations for submission to ADMCC, Civil Defence, AADC and TDRA. We follow up on queries and revisions through to final approval within the scope of work.
A field team from our Mussafah workshop begins work on the agreed date. Containment work (conduits/trays), cable pulling with tension-limiting tools, outdoor splice-enclosure mounting, and initial termination work.
Fusion splicing, connector end-face inspection under a microscope, Tier 2 OTDR testing on every run from both directions, Tier 1 OLTS testing for total insertion loss, and live signal verification with network equipment. Every test is logged and attached to a LinkWare report.
Full documentation handover: as-built drawings, certification reports, a labelling database, manufacturer warranty certificate, and an operations and maintenance guide. An optional annual AMC contract includes quarterly preventive visits and 4-hour response.
OS2 fibre backbone for PACS systems, Malaffi records and EMR systems. ADHICS cybersecurity requirements mandate separating PHI networks from guest and admin networks — our designs implement this separation at the physical-infrastructure level.
Inter-building campus cabling, a 100G-capacity backbone for the academic campus, high-density connections for labs, libraries and lecture halls, designs that allow future upgrade to 400G without re-pulling.
A backbone for shops, POS, CCTV systems and public Wi-Fi services. Designs that accommodate DCI segments (if a backup data centre opens) and fast connectivity for new tenants.
Long-distance fibre runs for oasis farms (1-3km links between the main house and the farm), outdoor enclosures resistant to high heat and dust, hybrid solutions of Cat6A within the building + OS2 between buildings.
A fibre optic backbone for workshops and factories — resistant to electromagnetic interference (EMI) from manufacturing equipment, routes in high ceilings, integration with isolated OT/SCADA networks.
A backbone for rooms, IPTV services, Wi-Fi 6/7 hospitality connectivity, PMS systems and CCTV cameras — designs that allow full separation between guest networks and the hotel's admin/technical networks.
The fibre optic cabling we deliver in Al Ain is designed to UAE telecom operator requirements (Etisalat e& and du) where data handover over backbone fibre is required. This includes:
GPON connections from the Etisalat network require SC/APC connectors (green jacket, 8-degree angle, 60dB return loss) — these must never be mixed with SC/UPC connectors (blue jacket, flat polish, 50dB) used on internal networks. Mixing the two causes signal loss and GPON failures. We supply and install both types correctly per application.
Optical splitter design (1:8, 1:16, 1:32, 1:64) per approved cascading rules. Loss-budget calculation to ensure signal reaches the furthest ONT in the installation.
Fibre to the villa (FTTH), fibre to the building (FTTB), fibre to the cabinet (FTTC) — we select the appropriate architecture per project type and operator requirements.
A disclosure: we are an independent cabling integrator. We do not currently claim officially authorised vendor status with Etisalat or du. We deliver cable installation + Fluke/OTDR certification that meets operator activation requirements — the building owner or main MEP contractor handles submitting formal operator-specific approvals.
Quicknet Computers · Mussafah HQ + Al Ain service coverage · +971 50 852 9609
Yes — Quicknet delivers Fiber Optic Cabling services across all major areas of Al Ain including Al Jimi, Al Mutaredh, Al Manaseer, Al Khabisi, Al Tawia, Hili, Al Foah, Al Yahar, the Al Ain Industrial Area, the UAEU campus and the surrounding farm/villa estates. Our Al Ain branch handles site survey, design, supply, installation, commissioning and ongoing AMC, backed by our Mussafah head office for stock and larger multi-site projects.
For most Fiber Optic Cabling projects in Al Ain we can attend a free site survey within 24–48 hours and submit a written quotation within 3 working days. Smaller installations can begin the same week; larger phased projects follow a documented design and approval timeline.
We take on Fiber Optic Cabling projects across Al Jimi, Al Mutaredh, Al Manaseer, Al Khabisi, Al Tawia, Hili, Al Foah, Al Yahar, the Al Ain Industrial Area, the UAEU campus and the surrounding farm/villa estates. Typical sites for this service include campuses, hospitals and clinics, hotels, offices and multi-building estates.
It depends on the project. At the site survey we confirm which electrical, building, telecom and sector requirements apply and document the installation accordingly; where an authority approval is needed, the licence holder or consultant files it and we prepare the technical documents.
Yes — Annual Maintenance Contracts include quarterly preventive visits, firmware updates, agreed-price spare parts and 4-hour response on Severity 1 incidents anywhere in Al Ain. Combined CCTV + IT + access AMCs can be quoted together as one contract; ask for a combined quote.
Yes. Backbone fiber we deliver is designed to UAE telecom-operator requirements when data needs to be handed off to Etisalat e& or du. GPON connections from an Etisalat network require SC/APC connectors (green boot, 8-degree angled polish, 60 dB return loss) — never mixed with the SC/UPC connectors (blue boot, flat polish, 50 dB) used on internal networks, since mixing the two causes signal loss and GPON faults; we supply and terminate both correctly per application. Disclosure: we are an independent cabling integrator — we do not currently claim official Etisalat- or du-approved-vendor status. We deliver the cable installation and Fluke/OTDR certification the operator's commissioning requires; the building owner or main MEP contractor handles the operator's own formal approvals.
Single-mode fibre (OS2) is usually the right choice for inter-building backbones and long distances (up to several kilometres), Etisalat/du connections, and links to regional data centres. Multi-mode fibre (OM3/OM4/OM5) is usually the economical choice within a single data centre or inside one building for shorter distances (≤400m for 10G). For most large Al Ain projects we recommend a hybrid solution: OS2 for the inter-building backbone plus OM4 inside the building.
Yes — every fibre run undergoes Tier 2 OTDR testing from both directions at two wavelengths (1310 and 1550nm for OS2, or 850 and 1300nm for OM3/OM4), Tier 1 OLTS testing for total insertion loss, and connector end-face inspection to IEC 61300-3-35. A formal LinkWare PDF report with every documented link is part of the standard handover — required for manufacturer certification (25-year warranty) and for any future audit.
Quicknet is an independent integrator for network and fibre optic cabling. We supply Belden, Commscope, Norden, Panduit, Corning and Furukawa products through authorised official distribution, and we install, certify and provide after-installation support for them. We do not currently claim a specific-tier manufacturer-authorised-partner status. Our value is in honest design, neutral product selection and disciplined after-installation support — not manufacturer marketing badges. If your project requires a specific-tier manufacturer partner statement, let us know at the survey stage and we will tell you honestly whether we can meet that requirement.
Yes — we design and install long-distance fibre runs (1–3km) between the main house and the farm, and between scattered buildings in large villa estates. We use outdoor cable resistant to UV and high heat, protected splice enclosures, and we handle heritage constraints (not disturbing historic building facades) via underground or concealed routes. The choice of cable type (loose-tube vs tight-buffered) depends on the environment — we select it based on the actual site conditions.
Splicing joins two fibers so light passes through with as little loss as possible. Fusion splicing welds the fiber ends together with an electric arc and is the usual method for permanent links. Mechanical splicing aligns the ends in a small connector and is used for quick or temporary joins. After splicing, the link is tested with an optical power meter or an OTDR to check the loss, and the results are recorded in the handover documents.
Quicknet Computers designs, splices and tests single-mode and multi-mode fibre in Al Ain, with OTDR testing of the backbone. A free site survey comes first, then a written quote, from the Al Ain Branch at 30905, Al Marami 7 Street, Industrial Area, backed by the Mussafah HQ team.
Real customer reviews from the Google Business Profile of Quicknet Computers Al Ain Branch — 30905, Al Marami 7 Street, Industrial Area, Al Ain. Independent integrator since 2012, ADMCC approved, ISO 9001 and ISO 27001 certified. See our aggregate across all 3 branches (4.59 ★ / 427 reviews).
View all reviews across branches → +971 50 852 9609 WhatsApp Now
Electric Car Charging Installation · Audio Video Solutions · IPTV & Hospitality TV · Queue Management Systems · managed IT support in Al Ain · annual maintenance for office computers in Al Ain.
Or view this service in another city: Fiber Optic Cabling in Abu Dhabi · Fiber Optic Cabling in Mussafah.
Cabling guides: Single-Mode vs Multi-Mode Fiber · Fiber vs Copper · Fluke / OTDR Certification · Etisalat & du Readiness.
Quicknet Assistant
Common questions
Hi! 👋 I'm the Quicknet Assistant.
I can answer common questions about our services. What can I help you with today?