Skip to main content

PoE Switch Installation in Abu Dhabi, Al Ain and Dubai

PoE budget sizing, cabling, rack mounting, port labelling and testing for CCTV, Wi-Fi, IP phone and door entry networks.

Get a Free Quote   📞 Book a Site Survey

By Quicknet Engineering Team, Quicknet Computers · Reviewed by Jenson Cleetus · Published: 14 November 2026 · Last reviewed: 14 November 2026
✅ Free site survey ✅ Written itemised quote ✅ Abu Dhabi, Al Ain and Dubai projects ✅ ISO 9001:2015 & ICV Certified
The Service

What PoE Switch Installation Includes

A PoE (Power over Ethernet) switch sends power and data to a camera, access point, IP phone or door station over one network cable, so you do not need a power socket at every device. Quicknet Computers designs and installs PoE switches for CCTV, Wi-Fi, IP telephony and door entry in Abu Dhabi, Mussafah and Al Ain, and on Dubai projects: we size the power, mount the switch, patch and label it, and test every port.

  • PoE switches for 4, 8, 16, 24 and 48 devices, managed or unmanaged
  • PoE for IP cameras, access points, IP phones, video door stations and readers
  • PoE extenders and media converters for runs longer than 100 metres
  • Switch cabinets or wall racks with patch panels and cable management
  • Fibre uplinks between switches in different buildings or floors
  • Network separation for CCTV, office and guest traffic (VLANs) on managed switches
Process

How We Plan and Install a PoE Switch

  1. List the devices and their power. Each device takes a set amount of PoE power. We add them up and leave headroom, because the total is limited by the switch PoE budget, not only the port count.
  2. Choose the PoE standard. Basic cameras and phones use 802.3af; PTZ cameras and many access points need 802.3at; some devices need higher power.
  3. Check cable length. Ethernet is limited to 100 metres per run. Longer runs use a PoE extender, a media converter on fibre or a second switch.
  4. Choose managed or unmanaged. A few cameras on their own network can use an unmanaged switch. Mixed use, remote access or many devices call for a managed switch.
  5. Mount and ventilate. The switch goes in a rack or a ventilated wall cabinet, never in a closed box in the sun.
  6. Patch, label and power. Each port is patched, labelled to match the device and, for critical systems, put on a UPS.
  7. Test. We check that every device gets power and link speed, record port names and hand over a simple port map.
Sizing

PoE Standards and What They Power

PoE standards and typical devices. Confirm against the datasheet of each device.
StandardPer-port power (at the switch)Typical devices
802.3af (PoE)Up to 15.4 WBasic IP cameras, IP phones, small access points
802.3at (PoE+)Up to 30 WPTZ cameras, dual-radio access points, video door stations
802.3bt (PoE++)Up to 60 W or moreHigh-power PTZ, some displays and thin clients
Avoid

Mistakes With PoE Switches

  • Buying by port count only and running out of PoE budget when cameras switch on infrared at night.
  • Running a PoE cable beyond 100 metres.
  • Putting the switch in a closed box with no airflow.
  • Using cheap copper-clad aluminium cable, which loses power and drops devices.
  • Putting CCTV, office computers and guest Wi-Fi on one flat network.
  • No UPS, so cameras and phones all restart after a power blip.
Coverage

PoE Switch Installation in Abu Dhabi, Al Ain and Dubai

We install PoE switching across Abu Dhabi island, Mussafah, Khalifa City and Al Reem Island from our Abu Dhabi offices, in Al Ain from the Al Ain branch and in Dubai on a project basis, usually alongside CCTV or Wi-Fi. See also structured cabling, network rack guide, UPS installation and UniFi network installation.

Quicknet

Why Have Quicknet Install Your PoE Switch

Quicknet Computers is an IT and security integrator working in Abu Dhabi since 2012 with ISO 9001:2015 and ICV certification. We size the PoE budget before we buy, label every port and leave you a port map. Request a free survey.

FAQ

PoE Switch Installation: FAQs

Do you install PoE switches in Abu Dhabi?
Yes. Quicknet Computers installs and configures PoE switches for CCTV, Wi-Fi, IP phones and door entry in Abu Dhabi, Mussafah and Al Ain, and on Dubai projects.
How many cameras can one PoE switch run?
It depends on the switch PoE budget and the power each camera draws, not only the number of ports. We add the loads and leave headroom.
What is the longest PoE cable run?
Ethernet cable is limited to 100 metres. For longer runs we use a PoE extender, fibre with a media converter or an extra switch.
Do I need a managed switch?
Not for a few cameras on a private network. For many devices, remote access or separating CCTV from office traffic, a managed switch is better.
Do I need a UPS for my PoE switch?
For CCTV, door entry and phones, a UPS keeps them running through short power cuts and avoids restarts. We size it with the switch.
Can you replace my existing switch?
Yes. We map the old ports, move devices across, label the new switch and test every device.
Do you install in Dubai?
Dubai is handled on a project basis. We plan, price and schedule the job. We have no Dubai office.
How do I get a quote?
Send the list of devices, the distances and the location by WhatsApp or the contact form. We survey for free and send an itemised written quote.

Get a Quick Quote

Share a few details and your enquiry goes straight to our sales team.

Prefer WhatsApp? Message us on WhatsApp

We reply to your enquiry with a written quote after the site survey.

We use your details only to reply to your enquiry. Privacy policy

Need a PoE Switch Installed?

Tell us the devices, the distances and the location in Abu Dhabi, Al Ain or Dubai; we survey for free and send an itemised written quote.

Get a Free Quote ‎+971 50 852 9609‎   💬 Chat on WhatsApp