Skip to main content

SIP Trunking for UAE Businesses

Move from legacy phone lines to SIP trunks — flexible IP-based voice channels that connect your PBX to the carrier and scale on demand. Configured and secured by Quicknet.

Get a Free Quote 💬 WhatsApp

By Jenson Cleetus, Founder & CEO, Quicknet Computers · Reviewed by Quicknet Engineering Team · Last reviewed: 19 October 2026
Definition

What Is a SIP Trunk?

A SIP trunk is a phone line delivered over an internet (IP) connection that links your business phone system (PBX) to the public telephone network. It can replace traditional ISDN or analogue lines, and its capacity is counted in simultaneous call channels rather than physical lines.

SIP trunks and phone numbers are ordered from a licensed UAE operator (e& or du). Quicknet connects and configures your PBX to the trunk you order; it does not supply trunks or numbers. See also whether VoIP is legal in the UAE.

Overview

Modern lines for a modern phone system

For decades, businesses connected their phone systems to the outside world with physical lines — analogue lines or ISDN PRI circuits. They were inflexible: adding capacity meant a site visit and a new circuit, and each line sat idle when not in use. SIP trunking replaces all of that with voice channels delivered over your data connection.

With SIP trunks, the number of concurrent calls is a software setting, not a physical limit. You can hold dozens of direct-dial numbers, route them to any extension or branch, and add channels for a busy season then scale back down. Call charges depend on the operator’s plan and can be lower than on legacy lines, especially between branches and internationally.

Quicknet helps you order SIP trunks from your carrier, integrates them cleanly with your existing or new PBX (3CX, Grandstream, Yeastar, Avaya, NEC, Panasonic, Cisco), coordinates number porting with the carrier, and — crucially — secures the trunk behind a session border controller so you are protected from toll fraud and attacks.

Get SIP trunk pricing

SIP trunk basics

  • 📵 Replaces: Analogue & ISDN PRI lines
  • 📣 Channels: Many calls per trunk
  • 📞 DIDs: Direct-dial numbers
  • 💰 Costs: Set by the operator plan
  • 🔒 Security: SBC + fraud protection
Benefits

Why businesses switch to SIP trunking

Lower costs

Line rental and call charges depend on the operator plan and can be lower than analogue or PRI lines, especially for inter-branch and international calls.

Elastic capacity

Add or remove call channels in software to match demand. No physical line installs, no waiting.

Number flexibility

Keep your numbers, add DIDs, and present a local UAE presence or centralise numbering across branches.

Built-in resilience

Configure overflow and disaster recovery so calls reroute automatically to another site or mobile if needed.

Comparison

SIP trunks vs legacy lines

FactorAnalogue / ISDN PRISIP trunk
Adding capacityNew physical line, site visitPlan change with the operator
Cost modelPer-line rental; call rates set by the operatorPer-channel plan; call rates set by the operator
Multi-siteSeparate lines per siteCentralised, shared across branches
Disaster recoveryLimited / manualAutomatic re-route to site or mobile
ScalabilityFixed blocksGranular, on demand

SIP trunks need adequate, stable internet bandwidth — which Quicknet assesses and engineers as part of delivery.

Security

Why an SBC matters — and how we protect you

A SIP trunk connects your phone system to the public internet, which makes security essential. Unprotected trunks are a well-known target for toll fraud, where attackers hijack a system to place expensive international calls, and for denial-of-service and eavesdropping attempts. Toll fraud bills can be large, and the risk is avoidable.

Quicknet always deploys SIP trunks behind a session border controller (SBC) or a properly hardened firewall. We enforce IP whitelisting, strong credentials and encryption, set international-call and spend limits, and monitor for anomalies. The trunk is integrated and tested for call quality, caller-ID and emergency calling before go-live, and documented for handover. The outcome is the cost and flexibility of SIP with the security of a properly engineered system.

Numbers

Number Porting and DID Numbers on a SIP Trunk

A DID (direct inward dialling) number lets outside callers reach a specific extension or group directly. With a SIP trunk, your numbers, either a single number or a DID range, are supplied by the operator you order the trunk from; Quicknet does not supply or port numbers.

If you already have numbers with e& or du, ask the operator whether and how they can be moved to the new service (number porting). The operator decides the process and the timeline. Quicknet coordinates with your operator and configures the PBX so calls keep arriving.

Before you order, ask the operator in writing about the number of channels, the number range, the porting timeline, the contract term, VAT and activation charges.

Comparison

SIP Trunk vs PRI (ISDN) vs Virtual PBX

All three options give a business phone numbers and the ability to make and receive calls. They differ in how the line reaches you and where the PBX runs. Lines and numbers for every option come from a licensed UAE operator (e& or du).

FactorSIP trunkPRI (ISDN)Virtual PBX (hosted)
MediumVoice over an IP data connectionDedicated digital circuit into a PRI card on the PBXVoice over the internet to a hosted platform
ChannelsOrdered as simultaneous-call channelsFixed block of channels defined by the circuitSet by the hosted plan
Where lines come fromLicensed operator (e& or du)Licensed operator (e& or du)Licensed operator (e& or du), through the hosting provider
PBX locationOn-site IP PBX, or a SIP-capable PBXOn-site PBX with a PRI interfaceNo PBX hardware on site; phones or apps register to the platform
Migration considerationsNeeds a SIP-capable PBX or gateway, enough bandwidth, a firewall or SBC set-up and a number-porting planOlder PBXs often only support PRI; a gateway can bridge a PRI-only PBX to SIPHandsets or apps change, extension management moves to the provider, and numbers may need porting

Availability of each type depends on the operator and the building. We confirm what can be ordered at the site survey and recommend the option that fits your PBX. See also PABX migration and upgrade and cloud PBX.

Connect your PBX to SIP trunks securely

Quicknet connects your PBX to the SIP trunk you order from e& or du, then configures and secures it — with number-porting coordination and fraud protection built in. Get a quote today.

Get a Free Quote ‎+971 50 852 9609‎ 💬 WhatsApp
FAQ

Frequently Asked Questions

What is a SIP trunk in simple terms?
A SIP trunk is a virtual phone line that connects your PBX to the phone network over the internet. One trunk carries many simultaneous calls and supports multiple direct-dial numbers, replacing physical analogue or ISDN lines.
How many calls can one SIP trunk handle?
A SIP trunk is sized in channels, where each channel is one simultaneous call. You choose the channel count based on your busy-hour call volume, and it can be scaled up or down in software.
Will SIP trunking reduce my phone bill?
Often, yes. SIP trunks can lower line rental and call charges compared with legacy lines, but the result depends on the operator’s plan and your call patterns. The operator sets the price; we compare your current lines with the options in the quote.
Are SIP trunks secure?
SIP trunks are secure when properly engineered. Quicknet always deploys SIP trunks behind a session border controller or hardened firewall, with IP whitelisting, encryption, spend limits and monitoring to prevent toll fraud and attacks.
Do SIP trunks work with my existing PBX?
Yes, with most modern IP PBX systems (3CX, Grandstream, Yeastar, Avaya, NEC, Panasonic, Cisco). Older TDM systems may need a gateway, which we can supply; see our VoIP gateways page.
Can I keep my existing business numbers when I move to a SIP trunk?
Whether numbers can move depends on the operator. Your numbers are held with your current operator (e& or du), so ask that operator, and the operator of the new trunk, whether and how the numbers can be ported and how long it takes. Quicknet coordinates with your operator and configures the PBX so calls keep arriving, but it does not port or supply numbers itself.
Why won't my carrier SIP trunk register on the PBX?
Common checks are: whether the carrier uses registration or IP-address authentication; the authorisation name, username and password entered exactly as supplied; the server address, port and transport the carrier gave you; firewall rules and SIP ALG on the router; NAT and public IP settings; and codecs that both sides support. Trunk details, allowed IP addresses and channel counts come from the operator (e& or du), so confirm them with the operator and ask them to check their side if the trunk still fails.
How much does a SIP trunk cost in the UAE?
SIP trunk prices are set by the operator, not by Quicknet. du publishes Business SIP plans from AED 580 per month for 10 channels up to AED 5,000 for 100 channels, plus 5% VAT, a one-time AED 1,000 activation fee and a 12-month contract (checked 15 October 2026; prices may change). Check e& for its current offer. Quicknet connects your PBX to the trunk you order.
Which companies provide SIP trunks in the UAE?
SIP trunks in the UAE come from licensed telecom operators, mainly e& and du. Quicknet Computers is not an operator and does not sell the lines. We survey the site, connect your PBX to the operator's trunk, set up registration and call routing, and test inbound and outbound calls before go-live.
Who provides SIP trunks in the UAE?
SIP trunk lines come from UAE telecom operators such as e& and du, or from a hosting provider that sources them. Quicknet is not a carrier: we check which type can be ordered at your building, configure your PBX or gateway, and test inbound and outbound calls.
Can I get a UAE or toll-free number with a SIP trunk?
Telephone numbers, including toll-free numbers, and SIP trunks are supplied by a licensed UAE operator such as e& or du, not by Quicknet, and which number types are available depends on the operator and the product. Confirm the number type and the trunk details with the operator; Quicknet then configures the numbers on your phone system and tests inbound and outbound calls.
Explore More

Adjacent brands, services and guides across the Quicknet telephony cluster.

Phone system pillars

Connect legacy systems

Guides

Dubai projects are handled on a project basis from our Abu Dhabi team; Quicknet has no Dubai office.

Related IP phone systems

Choosing a PABX company