Skip to main content

Point-to-Point & Point-to-Multipoint Wireless Bridges in Abu Dhabi & the UAE

Outdoor wireless bridges for buildings, campuses, industrial yards and multi-site connectivity — 100 metres to 50 kilometres, on the right band for your link.

By Quicknet Engineering Team, Quicknet Computers · Reviewed by Jenson Cleetus · Last reviewed: 18 October 2026

6 June 2026  ·  14 min read  ·  By Quicknet Engineering Team

When fibre is impractical, too slow to deploy, or genuinely not feasible across a road, between buildings on separate land titles, or out to a remote yard — wireless bridges are the right answer. This guide explains how point-to-point (PTP) and point-to-multipoint (PTMP) wireless links work, the realistic distance and capacity ranges, the UAE TDRA regulatory landscape, and where wireless beats fibre versus where fibre still wins.

What is a Wireless Bridge?

A wireless bridge is a pair of outdoor radios with directional antennas that transparently link two networks over the air. The two endpoints behave like they share a single Ethernet cable — the same VLANs, the same subnets, the same broadcast domain. Modern wireless bridges achieve real-world throughput from a few hundred Mbps on short unlicensed links up to multi-Gbps on licensed microwave or 60 GHz mmWave kit.

Two architectures dominate UAE deployments:

  • Point-to-Point (PTP) — exactly two endpoints, dedicated bandwidth, focused beam pattern. The right choice for connecting two buildings, two yards or two sites with predictable bandwidth requirements.
  • Point-to-Multipoint (PTMP) — one base-station radio with a sector antenna serving multiple remote subscriber units. The right choice for one head office serving 5-30 satellite cabins, or a multi-tenant office park, or a community-wireless deployment.

How Point-to-Point Wireless Works

A PTP link is two outdoor units (ODUs) with directional antennas — typically parabolic dishes for longer ranges or panel/horn antennas for short links — installed on rooftops, masts or towers with clear line-of-sight between them. The radios use beamforming and tight antenna patterns to focus all transmit energy along the link path, which is what enables long ranges from modest transmit power.

Advantages of point-to-point wireless

  • No trenching, no civils. Fibre between buildings often requires road excavation, conduit, vaults and authority approvals; a PTP link bypasses all of that.
  • Fast deployment. Most short PTP links go live in 1-2 weeks; fibre civils typically take 4-12 weeks.
  • Dedicated bandwidth. Unlike shared 4G/5G or PTMP, a PTP link gives both endpoints the full negotiated capacity at all times.
  • No monthly circuit fee. Capital cost once; no recurring carrier charges.
  • Feasibility where fibre is not. Across rivers, between buildings on separate land titles, to remote desert installations, to construction sites with no permanent infrastructure.

Limitations of point-to-point wireless

  • Line-of-sight required. The Fresnel zone (a football-shaped 3D volume around the direct line between the two antennas) must be clear of trees, buildings, towers and terrain. New construction between the endpoints can break an existing link.
  • Weather attenuation. Heavy rain and dense sandstorms reduce signal at higher frequencies; 60 GHz mmWave is the most rain-sensitive, 5 GHz the most tolerant.
  • Precision alignment. Long links (10+ km) require sub-degree antenna alignment — a metre of pole flex translates into significant pointing error at 20 km.
  • Capacity ceiling. Wireless typically tops out at 1-10 Gbps per link in 2026; fibre comfortably carries 10/40/100 Gbps.
  • Licensed-band paperwork. Longer or carrier-grade links use TDRA-licensed microwave bands, which require frequency coordination and licensing fees.

Point-to-Point Distance Brackets — Realistic Examples

Realistic ranges by equipment tier in clear UAE conditions:

100 metres

Adjacent buildings on the same plot — for example, a head office and a security gatehouse, or two villa wings, or a showroom and an attached workshop. Equipment: small panel antennas on 5 GHz or 60 GHz unlicensed radios. Typical capacity: 1 Gbps end-to-end. Mount: wall-bracket or short mast. Installation: 1-2 days.

500 metres

Two warehouses on the same logistics estate, or an office and a separate visitor pavilion across a car park. Equipment: mid-tier 5 GHz panel/dish on small masts. Typical capacity: 500 Mbps to 1 Gbps. Installation: 2-4 days including survey.

1 kilometre

A factory and its head office on the same industrial park, or two campus buildings separated by a main road. Equipment: parabolic dishes (30-60 cm) on 5 GHz or 6 GHz. Typical capacity: 300-700 Mbps. Often the sweet spot for unlicensed-band enterprise PTP.

5 kilometres

A Mussafah HQ and a yard in ICAD, or a head office and a satellite branch in another district. Equipment: 60-90 cm parabolic dishes on 5 GHz, on tall masts or rooftops with good elevation. Typical capacity: 200-500 Mbps. Fresnel zone planning becomes critical.

10 kilometres

A logistics depot and a remote yard, or an oil and gas surface installation and an office. Equipment: high-gain 90-120 cm dishes on 5 GHz, or licensed 11/18 GHz microwave. Typical capacity: 100-300 Mbps on unlicensed bands, 1 Gbps+ on licensed microwave. Tower or rooftop mounts essential.

20 kilometres

A head office and a remote desert installation, or two facilities separated by a coastline. Equipment: licensed microwave bands (typically 11-23 GHz) with 1.2-1.8 m antennas. Typical capacity: 200 Mbps to 1 Gbps depending on band and modulation. TDRA frequency assignment required.

50 kilometres and beyond

Carrier-grade microwave territory. Equipment: licensed 6-15 GHz long-haul microwave with large parabolic antennas (1.8-3 m) on tall towers. Typical capacity: 100 Mbps to 10 Gbps with adaptive modulation. Requires TDRA licensing, civil engineering for towers, lightning protection and full link budget engineering. This is what mobile operators and large enterprises use for backhaul.

Important: These ranges assume clear line-of-sight and standard UAE atmospheric conditions. Heavy rain reduces achievable distance at all frequencies; 60 GHz mmWave is the most rain-sensitive. Fade margin is engineered into every link to absorb weather effects — get the survey done first.

How Point-to-Multipoint Wireless Works

A PTMP deployment uses one base-station radio with a sector antenna (typically 60, 90 or 120 degrees of horizontal coverage) installed on a tall mast, tower or rooftop. Multiple subscriber-unit (SU) radios — one at each remote site — receive the base-station signal with smaller directional antennas pointed back at the base.

Architecture choices

  • Single-sector PTMP — one base station serves all remotes within its 60-120 degree sector. Simple, cost-efficient.
  • Multi-sector PTMP — 3, 4 or 6 sector antennas on the same tower cover 360 degrees, each operating on a separate channel. Used by ISPs and large industrial sites.
  • Mesh-PTMP hybrids — some platforms (Cambium PMP 450/700, Mimosa A5, Cisco URWB) add mesh redundancy between base stations for failover.

Coverage and capacity

A typical PTMP base station with a 90-degree sector antenna covers a radius of 5-15 km depending on band, equipment tier and remote-site antenna quality. Capacity is shared across all active remotes — a 1 Gbps base-station radio split across 30 active remotes delivers materially less than 30 Mbps per remote in practice, due to MAC overhead and contention. Modern TDMA-based PTMP platforms (Cambium ePMP, PMP 450, Mimosa A5) handle this far better than legacy 802.11-based kit.

PTMP business applications

  • Multi-tenant office parks — single base-station serves 10-30 tenant buildings
  • Residential community wireless — village or compound network where fibre to each villa is not feasible
  • Warehouse and yard complexes — head office serving multiple sheds, cabins and offices
  • Oil and gas surface installations — central facility serving distributed remote cabins
  • ISP last-mile networks — wireless ISPs serving neighbourhoods or rural communities
  • Construction site networks — temporary command office serving multiple site cabins

Wireless Backhaul — When Wireless Beats Fibre

Wireless backhaul is the use of PTP or PTMP links as the primary data path between sites, or as redundancy for an existing fibre link. The decision matrix:

When wireless wins

  • Time-to-deploy is the binding constraint (days vs weeks/months)
  • Civil work for fibre is impractical (separate land titles, road crossings, environmental constraints)
  • The connection is temporary (construction sites, events, disaster recovery)
  • The site is remote and fibre is uneconomic
  • You need diverse-path redundancy for an existing fibre link
  • The required capacity is well below the link ceiling (under 1 Gbps for unlicensed, under 10 Gbps for licensed)

When fibre still wins

  • Capacity requirement exceeds 10 Gbps
  • The link is mission-critical and weather independence matters (e.g. healthcare, financial trading, real-time control)
  • The path is buildable (existing conduits, single land title, short distance)
  • Latency must be both low and bounded — fibre is more deterministic than wireless
  • The asset is intended to last 20+ years — fibre cables outlive wireless equipment

The hybrid option

Many UAE multi-site projects use fibre as the primary path and wireless as redundancy. Fibre handles steady-state traffic; the wireless link automatically takes over if a cable cut, civil works damage or vendor outage breaks the primary. Cost is materially lower than two diverse fibre paths and resilience is genuine. See our fibre optic cabling guide for the alternative side.

UAE TDRA Regulatory Landscape

Outdoor wireless equipment in the UAE must comply with TDRA (Telecommunications and Digital Government Regulatory Authority) rules on frequency, transmit power, equipment type-approval and outdoor installation. The landscape:

Unlicensed bands (no individual link licence required)

  • 5 GHz (5150-5350 MHz and 5470-5725 MHz) — the workhorse band for enterprise PTP and PTMP up to about 10 km. Mature equipment, reasonable rain tolerance, broad device support.
  • 6 GHz (lower band, 5925-6425 MHz) — TDRA has opened this band for low-power indoor use; outdoor PTP/PTMP operation has additional limits.
  • 60 GHz unlicensed (V-band, around 57-66 GHz) — extremely high capacity (multi-Gbps) over short distances (under 1-2 km); very rain-sensitive but excellent for adjacent-building campus links.
  • 2.4 GHz — still legal but heavily congested; not recommended for new enterprise PTP/PTMP unless no alternative exists.

Licensed microwave bands (TDRA frequency assignment required)

  • 11, 13, 15, 18, 23, 38 GHz — fixed-link microwave bands used by carriers and large enterprises for backhaul. Licensing protects against interference but adds time, paperwork and recurring fees.
  • E-band (71-76 and 81-86 GHz) — high-capacity short-range licensed mmWave; used in dense urban backhaul.
  • Long-haul 6-8 GHz — used by mobile operators for inter-site backhaul over 30-100 km.

What this means for your project

For most enterprise PTP and PTMP up to about 10 km in the UAE, unlicensed bands (primarily 5 GHz, with 60 GHz where short and high-capacity is the brief) are the right answer. They are generally sold for TDRA-permitted use (confirm the current rules with TDRA), the equipment is broadly available, deployment is fast and cost is contained. Licensed microwave becomes the right answer when distance exceeds 10 km, when interference protection is critical, or when carrier-grade reliability is the contractual requirement.

Quicknet handles TDRA paperwork. Where licensing is required, we manage the frequency coordination, licence application and renewal as part of the engagement scope — you do not deal with TDRA directly.

Equipment Landscape — Independent Vendor View

We are an independent wireless integrator and select equipment for the link, not for the brand. The platforms we routinely design with:

Cambium Networks

PTP 650/670/700/820 series for licensed and unlicensed PTP; ePMP and PMP 450 series for PTMP. Strong industrial track record, good performance in dense deployments, cloud management via cnMaestro. Common choice for oil and gas, mining, utilities and ISP networks.

For the dedicated Cambium Networks brand coverage — PTP, PMP, Wi-Fi, switching, cnReach industrial radio and cnMaestro management — see our Cambium Networks page.

Ubiquiti (airFiber and airMAX)

airFiber 60/120/60-XR for high-capacity 60 GHz; airFiber 5XHD for 5 GHz long links; airMAX rocket/litebeam for short and PTMP. Strong cost-to-performance for SMB and small ISP deployments. UISP cloud management.

Mimosa Networks

B-series PTP and C-series PTMP — modern, software-defined kit with strong PTP capacity. Cloud management via Mimosa Cloud.

MikroTik Wireless

Wireless Wire (60 GHz short PTP), Cube/Light/LHG (5 GHz short and mid-range). Very cost-efficient, requires more configuration expertise than plug-and-play vendors.

For deeper coverage of MikroTik specifically — wireless APs, switches, routers and the RouterOS learning curve — see our MikroTik networking page.

Aviat Networks and Ceragon

Carrier-grade licensed microwave for long-haul and telecom-class backhaul. Ceragon IP-20 series, Aviat WTM 4000/3200. The right answer when you need TDRA-licensed reliability and serious capacity.

Siklu

60 GHz and 70/80 GHz E-band mmWave specialists. Excellent for high-capacity (multi-Gbps) urban backhaul.

Cisco, Aruba and others

Cisco IW outdoor wireless, Aruba outdoor APs and rugged products for industrial wireless. Often specified when the wider campus is already on Cisco or Aruba.

Brand selection is driven by distance, capacity, licence requirements, redundancy needs and budget — not by vendor commission. We are not exclusively tied to any single manufacturer.

UAE Use Cases

Industrial sites and oil & gas yards

A Mussafah or ICAD operations facility with several yards, cabins and remote installations. PTMP from a central tower serves multiple remote cabins; PTP backhaul links the central tower to head office or fibre handoff. Combined with our CCTV and AI surveillance infrastructure for full site visibility.

Multi-building corporate campuses

Several buildings on the same plot — head office, training centre, R&D wing, warehouse. PTP between buildings runs at 1-10 Gbps with low latency, the whole campus behaves as one LAN.

Warehouse-to-office connectivity

A Mussafah warehouse and an Abu Dhabi City head office that need to share the same ERP, WMS and CCTV systems. Short-haul PTP (under 5 km) on 5 GHz is typically the most cost-efficient solution.

Multi-site retail and hospitality

A hotel with separate spa or villa blocks across the property, or a retail chain with multiple stores in a single mall complex. PTP or PTMP avoids running fibre across customer-accessible areas.

Construction sites and temporary networks

A construction site with a command office and multiple site cabins. PTMP from the command office covers the whole site; everything decommissions cleanly when the project ends and re-deploys at the next site.

ISP last-mile and community wireless

Wireless ISPs serving residential compounds or remote communities. PTMP from a central tower covers a 5-15 km radius; each subscriber gets a small CPE antenna.

Disaster recovery and link redundancy

Wireless PTP as a backup path for a critical fibre link. Automatic failover within seconds when the primary fibre is cut. Strong choice for financial institutions, healthcare and government.

Deployment Process

1. Site survey and line-of-sight verification

The load-bearing first step. We visit both endpoints (or multiple PTMP remotes), assess available mount points, check existing obstructions, and use survey tools to confirm clear Fresnel zone. Most PTP projects that fail to perform were not surveyed properly.

2. Link engineering and band selection

Distance, required capacity, weather margin, available power and TDRA licensing constraints feed into the band and equipment choice. We produce a written link budget with expected throughput at low, mid and high modulation.

3. TDRA licensing where required

Licensed microwave bands need frequency coordination and licence application. We manage this end-to-end.

4. Mast, mount and rigging

Rooftop, parapet, mast or monopole. Civil engineering, lightning protection, grounding and earthing all part of scope. Building authority approvals where required.

5. Equipment installation and alignment

Outdoor radios, lightning protection, weatherproof grounding, alignment, spectrum analysis, modulation testing. Long links are aligned with a spectrum analyser and signal-strength meter to within fractions of a degree.

6. Commissioning and handover

Throughput testing, latency measurement, packet loss baseline, configuration backup, customer training. Documentation pack includes link budget, alignment notes, configuration export and spare-parts list.

7. AMC and link health monitoring

Annual antenna cleaning and inspection, firmware updates, performance trending, fade-margin tracking. Cloud management (cnMaestro, UISP, Mimosa Cloud) gives real-time visibility.

Design Considerations You Should Understand

Fresnel zone clearance

The Fresnel zone is a 3D ellipsoidal volume between the two antennas — at its widest in the middle of the link. A 5 km 5 GHz link has a 60% Fresnel zone wider than 5 metres at the midpoint. Obstructions inside this zone reduce signal even when they are not blocking the direct line.

Link budget and fade margin

Total signal budget = transmit power + antenna gain (both ends) - path loss - cable loss - receiver sensitivity. Fade margin is the safety buffer over the minimum signal required. UAE links should have at least 15-20 dB fade margin to absorb rain and dust events.

Adaptive modulation

Modern wireless bridges automatically step down modulation (and capacity) when conditions degrade. A link rated for 1 Gbps at 256-QAM may drop to 400 Mbps at QPSK during a heavy storm — but it stays up rather than failing entirely.

Polarization diversity

Most modern PTP and PTMP equipment uses dual polarisation (horizontal + vertical) to double capacity over the same channel. Both antennas must be precisely co-aligned.

Outdoor temperature derating

UAE rooftop ambient temperatures regularly exceed 55 degrees Celsius. Equipment rated to 55-60 degrees outdoor operation is essential; consumer indoor-grade kit will fail within months.

Frequently Asked Questions

What is a point-to-point wireless bridge?

A pair of outdoor radios with directional antennas that connect two locations over the air, instead of running fibre or copper between them. One radio at each end with clear line-of-sight, transparent Ethernet bridging, both buildings behave as if they share a single LAN. Distances from 100 metres to 50 km depending on equipment and band.

What is point-to-multipoint wireless?

One base-station radio with a sector antenna serves multiple remote subscriber units within its coverage area. Materially cheaper per remote site than building separate PTP links, in exchange for shared bandwidth and slightly higher latency. Right answer for 3+ remote sites from a central hub.

How far can a wireless bridge transmit?

100-500 metres on small panel antennas (5 GHz or 60 GHz unlicensed); 500m-2 km on mid-tier dishes (5/6 GHz); 2-10 km on larger parabolic dishes (5 GHz with careful Fresnel planning); 10-20 km on licensed microwave bands; 20-50 km on carrier-grade microwave with towers; 50 km+ on full carrier-class infrastructure. UAE rain and dust reduce these ranges; fade margin design matters.

Do I need a TDRA licence for a wireless bridge in the UAE?

Unlicensed bands (5 GHz, lower 6 GHz, 60 GHz V-band) do not require individual link licences but the equipment must be TDRA type-approved. Licensed microwave bands (11/13/15/18/23/38 GHz) require TDRA frequency assignment. Most enterprise PTP under 10 km in the UAE uses unlicensed bands; beyond 10 km or where interference protection is critical, licensed bands become the right answer. We handle the TDRA paperwork where licensing is needed.

What is the difference between PTP and PTMP?

PTP connects exactly two locations with dedicated bandwidth — both ends get the full link capacity. PTMP serves multiple remote sites from one base station with shared bandwidth — much cheaper per remote, slightly higher latency. PTP for predictable two-point links; PTMP for three or more sites from a central hub.

Is wireless backhaul a real alternative to fibre?

For the right project, yes — but it is a trade-off, not a strict replacement. Wireless wins on time-to-deploy, capital cost (no monthly circuit), and feasibility. Fibre wins on raw capacity (10/40/100 Gbps), weather immunity, longevity. Many UAE projects use hybrid: fibre as primary, wireless as redundancy.

How does UAE weather affect outdoor wireless links?

Rain fade reduces signal at higher frequencies — 60 GHz mmWave is the most sensitive, 5 GHz is the most tolerant. UAE rain is infrequent but intense; links engineered for January storms operate reliably the rest of the year. Dust accumulates on antennas — annual cleaning is part of any proper AMC. Heat affects equipment lifespan; outdoor radios rated to 55-60 Celsius are essential.

Which brands of wireless bridge equipment do you install?

Cambium Networks (PTP and PMP series — strong for industrial yards), Ubiquiti (airFiber and airMAX — popular for SMB and ISP), Mimosa Networks (modern PTP/PTMP), MikroTik (cost-efficient short-link), Aviat Networks and Ceragon (carrier-grade licensed microwave), Siklu (60/70/80 GHz E-band mmWave), Cisco and Aruba outdoor wireless. Independent integrator — brand selection driven by the link, not by vendor commission.

How much does a point-to-point wireless link cost in the UAE?

Cost is driven by distance, capacity, licensed vs unlicensed band, antenna size, tower/mast, civil work and TDRA licensing. Rather than publish guide prices that mislead, we provide a written quote after a site survey confirms line-of-sight, identifies mount requirements, and locks the band against TDRA rules. Most enterprise PTP under 5 km on unlicensed bands deploys within a few weeks of survey.

What is the typical installation timeline?

Short unlicensed links (under 1 km, both ends rooftop, no licence, no civils): 1-2 weeks. Mid-range links (1-10 km, possible mast work, authority approvals): 3-6 weeks. Long licensed links (10 km+, TDRA coordination, tower construction): 8-16 weeks. The site survey is the load-bearing first step — everything depends on confirmed line-of-sight.

Bottom Line

Wireless bridges solve real-world UAE connectivity problems that fibre cannot — between buildings on separate plots, across roads, out to remote yards and as fast-deploy redundancy for critical fibre links. Choose PTP for predictable two-point links, PTMP for hub-and-spoke architectures. Use unlicensed bands (primarily 5 GHz, with 60 GHz where short and high-capacity matters) for links under about 10 km; step up to licensed microwave for longer or carrier-grade requirements. The site survey is the load-bearing first step. Vendor selection is driven by the link, not by the brand. Talk to us for a free line-of-sight survey across Abu Dhabi, Al Ain, Mussafah, ICAD and the wider UAE.


Request a Site Survey   Business Wi-Fi   ‎+971 50 852 9609‎

Need a Wireless Bridge Between Two Sites?

Free line-of-sight survey across Abu Dhabi, Al Ain, Mussafah, ICAD and the wider UAE. Written link budget, equipment selected for TDRA requirements, and clear deployment timeline.

Request Free Survey ‎+971 50 852 9609‎ WhatsApp Now