UTP vs STP vs FTP: Shielded and Unshielded Network Cable for UAE Offices
What the cable codes U/UTP, F/UTP, U/FTP and S/FTP mean, which category normally uses which, when shielding is worth it and why a shielded link must be grounded correctly.
✅ Plain-language guide✅ Last reviewed 19 November 2026✅ Abu Dhabi and Al Ain✅ ISO 9001:2015 & ICV Certified
At a Glance
Cable Codes at a Glance: U/UTP, F/UTP, U/FTP and S/FTP
The code names the shield on the whole cable (the letter before the slash) and the shield on each pair (the letters after it). UTP, STP and FTP are the everyday names buyers search for.
Network cable codes and where each is used.
Cable code
What it has
Typically used for
U/UTP (UTP)
No overall shield and no pair shield
Cat5e and Cat6; the budget choice where 10 GbE is not planned
F/UTP (FTP)
Overall foil shield, pairs unshielded
Cat6 and Cat6A; also Cat8 for short data-centre links
U/FTP
No overall shield, foil around each pair
Premium Cat6A construction that controls crosstalk between adjacent cables
S/FTP (commonly called STP)
Overall braid shield plus foil around each pair
Cat7 and Cat7A, and Cat8; rare in UAE offices outside industrial or healthcare imaging projects
Names
UTP, STP and FTP: What Buyers Mean
UTP means unshielded twisted pair, written U/UTP in the cable code.
FTP means foil-shielded twisted pair, written F/UTP in the code: one foil around all the pairs.
STP is an informal name for shielded cable. Check the datasheet for the exact code (U/FTP, F/UTP or S/FTP) because the shield type changes how the cable is terminated and grounded.
Category and shield are separate choices. Cat6A, for example, is sold both as F/UTP and as U/FTP.
Choosing
Shielded or Unshielded: How to Choose
Which cable construction to choose for common projects.
Situation
Usual choice
New office build, 10 GbE and PoE++ in mind
Cat6A in F/UTP or U/FTP, the 2026 office default
Budget retrofit where 10 GbE is not planned
Cat6 is mainstream-acceptable; unshielded is common
Dense bundles in tray where crosstalk between cables is the concern
Shielded Cat6A (F/UTP or U/FTP) controls alien crosstalk
Industrial or healthcare imaging project that specifies it
Cat7 or Cat7A in S/FTP with GG45 or TERA connectors
A shield only helps if it is bonded to ground at the patch panel and at the termination points, and the whole link uses shielded components end to end. Incorrectly bonded shielded cable performs worse than properly installed unshielded cable, because the shield can act as an antenna. Grounding follows TIA-607, and every installed link is then certified with a cable analyser (Fluke) that checks 12 parameters including wire map, length, insertion loss and NEXT.
Quicknet
What Quicknet Installs
Quicknet Computers specifies the cable construction at the free survey, terminates it on keystone jacks and patch panels, grounds shielded links and certifies every drop. We work in Abu Dhabi, Mussafah and Al Ain, and in Dubai on a project basis. See structured cabling in Abu Dhabi, Al Ain, Mussafah and cabling cost per point.
The category figures and shielding notes are those in our category comparison and structured cabling guide. Cable codes follow the ISO/IEC 11801 naming; grounding follows TIA-607.
Last reviewed 19 November 2026. Confirm the exact construction and grounding for your building with the designer and the cable datasheet.
FAQ
UTP vs STP vs FTP: FAQs
What is the difference between UTP and STP cable? +
UTP (U/UTP) has no shield. STP is an informal name for cable with a shield: foil around all the pairs (F/UTP), foil around each pair (U/FTP) or both a braid and pair foils (S/FTP). Check the cable code on the datasheet.
What is the difference between UTP and FTP cable? +
UTP has no shield. FTP, written F/UTP, has one overall foil shield around the pairs. FTP gives more protection from outside interference but must be grounded correctly at the patch panel.
What do U/UTP, F/UTP, U/FTP and S/FTP mean? +
The letter before the slash is the shield on the whole cable and the letters after it are the shield on each pair. U is none, F is foil and S is braid, so S/FTP has a braid overall and foil on every pair.
Is shielded network cable better than unshielded? +
Not automatically. Shielded Cat6A controls crosstalk in dense bundles, but it only performs well when it is bonded to ground and shielded components are used end to end. Incorrectly bonded shielded cable can perform worse than correctly installed unshielded cable.
Which is better for an office, shielded or unshielded Cat6A? +
Both are sold as Cat6A. For new office builds in 2026 the default is Cat6A in F/UTP or U/FTP construction, terminated on RJ45 keystone jacks. Unshielded Cat6 is acceptable for budget retrofits where 10 GbE is not planned.
Does shielded cable need to be grounded? +
Yes. The shield must be bonded to ground at the patch panel and termination points, following TIA-607, and the whole link must use shielded components. Every installed link is then certified.
Is Cat7 common in UAE offices? +
No. Cat7 and Cat7A are rare in UAE offices outside specific industrial or healthcare imaging projects. They use S/FTP cable with GG45 or TERA connectors and are an ISO standard only. Cat6A is the usual choice.
Can shielded and unshielded cable be mixed? +
Different constructions can share a building, but a shielded link needs shielded jacks, patch panels and patch cords end to end and a ground bond at the panel. Quicknet specifies one construction per run and certifies every link.
Does Quicknet install shielded network cabling in Abu Dhabi and Al Ain? +
Yes. Quicknet surveys for free, specifies the cable construction, terminates and grounds it and certifies every drop in Abu Dhabi, Mussafah and Al Ain, and in Dubai on a project basis.
Planning a Cabling Project?
Tell us your building and the number of outlets. We survey for free, specify the cable and connectors and send an itemised written quote. Call or WhatsApp +971 50 852 9609.
๐ Service areas (Abu Dhabi / Mussafah / Al Ain)
Quicknet HQ: Shabia ME-11, Mussafah, Abu Dhabi.
Same-day site survey across Abu Dhabi (Yas Island, Saadiyat, Al Reem, Khalifa City, Al Bateen, MBZ City), Mussafah (ICAD I-IV, M-blocks), and Al Ain (Al Jimi, Al Hili, Zakher).